The aerogels insulation insulation board is very thin. Taking the 240mm solid clay brick wall which requires 75% building energy saving standard as an example, the ordinary insulation material needs 90mm thickness, while the aerogels insulation board only needs 15mm thickness, which is more than 80% thinner than the original. According to calculations, if the external wall of the house is affixed with "space class" adiabatic heat preservation board, in the same building area condition, because it is thin and saves space, can increase the rate of leaving the house about 5%.

One might worry that such a "thin" material will warm up. According to the introduction, the biggest characteristic of this material is its excellent insulation performance, because its thermal conductivity can be as low as 0.006W/m·k. In the cold winter of the north, residents rely on heavy quilts to heat their homes if ordinary insulation is turned off. The house, which is made of aerogels, can live comfortably without heating. In other words, this 15-millimeter layer of space material produces an insulation equivalent to about 10 kilograms of cotton quilts. It is also estimated that if the material is applied to a 200-liter refrigerator used in a home, it will not only increase the food storage capacity by about 4 to 6 liters, but also save about 1/3 of electricity due to its good heat preservation performance.

According to the expert inside course of study, normally circumstance falls, the material with good heat preservation effect is not often fire prevention, once the house produces fire, can accelerate fire to spread. But space class insulation board lets its enemies, known as "heat preservation" and "fire prevention," smartly "shake hands "- by its incombustible nature, it solves the problem of either no heat insulation or no fire protection. Articles come from the Internet

Aerogel equipment